Siemens SIMATIC ET 200pro Manual page 33

Instance 199 (C7 )
hex
This instance is used to establish a connection based on an existing exclusive owner
connection. The new connection also has the same transmission parameters as the
exclusive owner connection. When the exclusive owner connection is cleared, this
connection, too, is automatically cleared. The data length of this instance is always zero.
Common services for Assembly Object
Service
code
0x0E
0x10
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
Service available
Class Instance
Yes Yes
No Yes
The ET 200pro EtherNet/IP module
3.7 Device profile: supported CIP objects
Service name Description
Get_Attribute_Single Supplies contents of the appropriate
attribute
Set_Attribute_Single Modifies an attribute value
33