Device Profile: Vendor-Specific Objects; Adapter Object - Siemens SIMATIC ET 200pro Manual

3.8

Device profile: vendor-specific objects

3.8.1

Adapter Object

The Adapter Object provides the external configuration and monitoring interface to the
ET 200pro EtherNet/IP.
Class code
Class attributes
Number of instances 1
Instance 1 attributes of the Adapter Object
Attribute Access rule
ID
1 Get
2 Get
3 Get
4 Get/Set
2
5 Get
6 Get
7 Get
8 Get/Set
2
9 Get/Set
2
10 Get/Set
2
11 Get/Set
2
12 Get/Set
2
13 Get/Set
2
14 Get/Set
2
15 Get/Set
2
16 Get/Set
2
ET 200pro distributed I/O EtherNet/IP interface module
Manual, 03/2016, A5E32861915-AB
0x64
No attributes are supported for the Adapter Object at the class level.
Name
AdapterStatus
InputSize
OutputSize
AutoConfig
ConfigChanged
Diagnostic String
ConfiguredSlots
HeadParameters
IO_StatusEnable
HeadParamByte1
HeadParamByte2
HeadParamByte3
HeadParamByte4
HeadParamByte5
HeadParamByte6
HeadParamByte7
3.8 Device profile: vendor-specific objects
Data type Data value
USINT Adapter Status (see AdapterStatus details
table).
USINT Currently configured input assembly size.
USINT Currently configured output assembly size.
BOOL Automatic Configuration mode
1: Automatic configuration: the rack self-
configures based on the modules installed
(factory default).
0: Manual configuration: the rack configuration
is stored in nonvolatile memory.
BOOL True if manual configuration changes have
been made but have not taken effect.
Array of USINT An array of USINT containing slot diagnostics.
[65] The first byte of the array indicates the number
of valid diagnostic bytes within the array (the
remaining bytes within the array can be ig-
nored).
USINT Indicates the number of configured slot objects.
Array of USINT Configuration information for the adapter mod-
[19] ule.
BOOL Enables the generation of an I/O status byte at
the beginning of the input data I/O packet.
Factory default = enabled.
USINT Parameter bytes for electronic module and
adapter module behavior.
USINT
USINT
USINT
USINT
USINT
USINT
The ET 200pro EtherNet/IP module
41