2 Installing the Bravo Platform
Connecting the Bravo Platform
Connecting the Bravo Platform
About this topic
Before you start
18
3
Ensure that the setscrews in the platepad tabs are recessed and not
protruding into the plate nest. Use a 1.5- mm hex wrench to back out any
protruding setscrews.
IMPORTANT
A protruding setscrew will prevent proper seating of the
labware in the platepad.
Figure Setscrew in platepad tab
This topic provides basic connection instructions for the Bravo Platform.
Figure Example of Bravo Platform basic connections
•
Make sure the laboratory setup requirements have been met.
•
Determine the placement of the Bravo Platform and computer. If the Bravo
Platform is integrated in a workstation, determine the Bravo deck location
for the external robot to hand off labware.
G5562A, G5563A Bravo Platform Safety and Installation Guide
00223