Table of Contents
Advertisement
2 Installing the Bravo Platform
Installing the dust cover
Installing the dust cover
About the Bravo dust cover
Figure Dust cover (1) top view, and (2) installation on a Bravo Platform with Standard Light Curtain
1
Installing the dust cover
Removing the dust cover
48
The Bravo dust cover is a clear plastic cover that sits atop a Bravo Platform
fitted with a Standard Light Curtain.
To install the dust cover:
1
Ensure that the Bravo power switch is set to the off (o) position.
2
Orient the dust cover so that the side with the middle spacer is at the
front of the Bravo Platform.
3
Position the dust cover on top of the Bravo Platform as follows:
•
The two corner spacers rest on top of the lightpost corners, which are
installed at the front of the Bravo deck. The middle spacer rests on top
of the front shield.
•
The two rear spacers rest on the top cover of the Bravo backplate.
To remove the dust cover:
1
Ensure that the Bravo power switch is set to the off (o) position.
2
Lift the dust cover up and off of the Bravo Platform.
2
G5562A, G5563A Bravo Platform Safety and Installation Guide
Advertisement
Table of Contents
