Table of Contents
Advertisement
2 Installing the Bravo Platform
Installing the Standard Light Curtain and shields
44
Figure Full-size side shield installed on the Bravo Platform (side view)
2
1
3
Item
Description
1
Top cover attachment screw
2
Top cover
3
Backplate
4
Shield attachment screws (four)
5
Lightpost (Standard Light Curtain)
6
Shield deck- access window (three)
To install the side shield:
1
At the side of the Bravo Platform, remove the screw (1) that attaches the
Bravo top cover (2) to the Bravo backplate (3).
2
Use the screw provided with the side shield to secure the side shield to
the Bravo top cover.
3
Using the four attachment screws (4) provided, secure the side shield to
the lightpost (5).
4
Install covers on up to three deck- access windows (6) in the shield unless
tubing or cabling access is required through the given window. Three T20
M4 8- mm screws secure each window cover to the rear shield to prevent
access through the window opening.
If applicable, route tubing or cables through a deck- access window where
no cover is installed.
5
4
6
G5562A, G5563A Bravo Platform Safety and Installation Guide
Advertisement
Table of Contents
