Table of Contents
Advertisement
Installing the side shields
G5562A, G5563A Bravo Platform Safety and Installation Guide
Figure Bravo Platform front shield attachment screws
The Bravo side shield configurations can vary depending on whether the Bravo
Platform is integrated with another device at a given side. The options include:
•
Full- size side shield. Prevents access to the Bravo moving parts from the
side. The full- size shield is used on a side where no device is integrated.
•
Upper side shield. Prevents access to the Bravo moving parts at the upper
side only. For example, the upper shield could prevent an operator from
reaching over a device with a low profile that is integrated at the side of
the Bravo Platform.
•
Partial- width shield. Prevents access from the side to certain deck
locations only. For example, if a device is integrated at the side aligned
with the back row of platepads, a partial side shield can prevent access to
the other rows of platepads that are not blocked by an integrated device.
The procedure in this section describes how to install the full- size side shield.
Refer to the following figure and table for this procedure.
2 Installing the Bravo Platform
Installing the Standard Light Curtain and shields
43
Advertisement
Table of Contents
