Table of Contents
Advertisement
G5562A, G5563A Bravo Platform Safety and Installation Guide
4
Slowly rotate the LED panels backwards again until the entire column of
LEDs on each panel turns solid green, indicating that the light beams are
aligned.
The two indicator lights on the front of the Bravo backplate turn blue.
IMPORTANT
If any of the LEDs on the lightpost panel are partial green
or blinking, the light beams are not completely aligned. On the front of
the Bravo backplate, the two indicator lights are red if the light beams are
not aligned.
Figure Rotating the LED panels to align the light beams
5
Use a 2.5- mm hex wrench to tighten the two adjustment screws located
near the top and bottom of each lightpost's interior- facing side, as the
following figure shows (1).
2 Installing the Bravo Platform
Installing the Standard Light Curtain and shields
41
Advertisement
Table of Contents
