Segger J-Link User Manual page 83

83
Syntax
-nostayontop
Example
3.3.5.18 -notimeout
GDB Server automatically closes after a timeout of 5 seconds when no target voltage can
be measured or connection to target fails. This command line option prevents GDB Server
from closing, to allow connecting a target after starting GDB Server.
Note
The recommended order is to power the target, connect it to J-Link and then start
GDB Server.
Syntax
-notimeout
3.3.5.19 -novd
Do not explicitly verify downloaded data.
Note
For the GUI version, this setting is persistent for following uses of GDB Server until
changed via command line option or the GUI.
Syntax
-vd
3.3.5.20 -port
Starts GDB Server listening on a specified port. This option overrides the default listening
port of the GDB Server. The default port is 2331.
Note
Using multiple instances of GDB Server, setting custom values for this option is nec-
essary.
Syntax
-port <Port>
Example
jlinkgdbserver -port 2345
3.3.5.21 -rtos
Specifies a RTOS plug-in (.DLL file for Windows, .SO file for Linux and Mac). If the file-name
extension is not specified, it is automatically added depending on the PC's operating system.
The J-Link Software and Documentation Package comes with RTOS plug-ins for embOS
and FreeRTOS pre-installed in the sub-directory "GDBServer". A software development kit
(SDK) for creating your own plug-ins is also available upon request.
J-Link / J-Trace (UM08001)
CHAPTER 3
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
J-Link GDB Server