Common Features Of The J-Link Product Family - Segger J-Link User Manual

Hide thumbs Also See for J-Link:
Table of Contents

Advertisement

25
1.3

Common features of the J-Link product family

USB 2.0 interface (Full-Speed/Hi-Speed, depends on J-Link model)
Any ARM7/ARM9/ARM11 (including thumb mode), Cortex-A5/A7/A8/A9/A12/A15/A17,
Cortex-M0/M1/M3/M4/M7/M23/M33, Cortex-R4/R5 core supported
Automatic core recognition
Maximum interface speed 15/50 MHz (depends on J-Link model)
Seamless integration into all major IDEs (
No power supply required, powered through USB
Support for adaptive clocking
All JTAG signals can be monitored, target voltage can be measured
Support for multiple devices
Fully plug and play compatible
Standard 20-pin JTAG/SWD connector, 19-pin JTAG/SWD and Trace connector, standard
38-pin JTAG+Trace connector
USB and 20-pin ribbon cable included
Memory viewer (J-Mem) included
Remote server included, which allows using J-Trace via TCP/IP networks
RDI interface available, which allows using J-Link with RDI compliant software
Flash programming software (J-Flash) available
Flash DLL available, which allows using flash functionality in custom applications
Software Developer Kit (SDK) available
14-pin JTAG adapter available
J-Link 19-pin Cortex-M Adapter available
J-Link 9-pin Cortex-M Adapter available
Adapter for 5V JTAG targets available for hardware revisions up to 5.3
Optical isolation adapter for JTAG/SWD interface available
Target power supply via pin 19 of the JTAG/SWD interface (up to 300 mA to target
with overload protection), alternatively on pins 11 and 13 of the Cortex-M 19-pin trace
connector
J-Link / J-Trace (UM08001)
CHAPTER 1
Common features of the J-Link product family
List of supported IDEs
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
)

Advertisement

Table of Contents

Troubleshooting

loading
Need help?

Need help?

Do you have a question about the J-Link and is the answer not in the manual?

This manual is also suitable for:

J-trace

Table of Contents

Save PDF