Using Command Strings - Segger J-Link User Manual

199
Example
SupplyPowerDefault = 1
5.13.1.67 SuppressControlPanel
Using this command ensures, that the control panel will not pop up automatically.
Syntax
SuppressControlPanel
5.13.1.68 SuppressInfoUpdateFW
After using this command information about available firmware updates will be suppressed.
Note
We strongly recommend not to use this command, latest firmware versions should
always be used!
Syntax
SuppressInfoUpdateFW
5.13.1.69 SWOSetConversionMode
This command is used to set the SWO conversion mode.
Syntax
SWOSetConversionMode = <ConversionMode>
Conversion mode
0
1
Example
SWOSetConversionMode = 0
5.13.2

Using command strings

For instructions on how to execute J-Link script files depending on the debug environment
used, please refer to:
SEGGER Wiki: Getting Started with Various IDEs
5.13.2.1 In J-Link commander
The J-Link command strings can be tested with the J-Link Commander. Use the command
exec supplemented by one of the command strings.
J-Link / J-Trace (UM08001)
CHAPTER 5
If only '\n' is received, make it "\r\n" to make the line end Win-
dows-compliant. (Default behavior)
Leave everything as it is, do not add any characters.
Description
© 2004-2017 SEGGER Microcontroller GmbH & Co. KG
Command strings