Write Error In The Eeprom Of The Main Pcb - Brother ADS-2000 Service Manual

LED
When all LEDs are flashing, press either start button ([Scan to PC] or [Scan to USB]), and the
LED display changes according to the error cause as described below.
Type of problem
A USB device not within the
specifications is connected to the
USB terminal, resulting in
overcurrent.
The front cover sensor detected an
open front cover during scanning.
LED
When the [Scan to PC]
button is pressed
When the [Scan to USB]
button is pressed
2-11
Error codes
CA
A4
Type of problem
codes
Write error in the
EEPROM of the
main PCB
Refer to:
2-15
2-16
Error
Refer to:
E6 2-15
Confidential