The Scanned Data Has Exceeded The Built-In Memory Capacity; The First Side Or Second Side Cis Flat Cable Is Not Connected Correctly; An Error Occurred During Access To The Dram In The Main Pcb Assy; Program Error - Brother ADS-2000 Service Manual

LED
The scanned data has exceeded the
built-in memory capacity.
The first side or second side CIS flat
cable is not connected correctly.
(This problem occurs only in
maintenance mode.)
An error occurred during access to
the DRAM in the main PCB ASSY.

Program error

An error occurred in the ROM
checksum.
Type of problem
2-9
Error codes Refer to:
C7 2-15
B0 2-15
3B 2-15
E1 2-15
E0 2-15
Confidential