Brother ADS-2000 Service Manual page 65

(3) Push the two hooks on the separation arm inward to open the separation arm, and remove
the separation spring from the front cover.
Note:
• Be careful not to damage the separation arm by opening it too much.
• Do not close the front cover when the separation arm is opened to prevent the
separation arm to be damaged.
(4) Push the two hooks on the front cover outward. Remove the two bosses on the separation
arm, and remove the separation arm from the front cover.
Separation arm
Boss
Hook
Hook
(5) Close the separation pad cover.
Assembling Note:
• When assembling the separation spring, engage it with ribs on the front cover and
separation pad cover.
Boss
Hook
Separation spring
Hook
Fig. 3-5
3-13
Rib
Separation spring
Separation pad cover
Rib
Front cover
Confidential