Setting Serial Number - Brother ADS-2000 Service Manual

1.4

Setting Serial Number

(1) Press and hold the [Stop] and [Scan to USB] buttons simultaneously, and plug the AC
cord into the outlet. The Power LED and the Error LED light.
(2) Press the [Stop], [Scan to USB], [Scan to PC], and [Stop] buttons in this order.
The Scan to PC LED and the Scan to USB LED light.
(3) Press the [Scan to PC] button. The Scan to PC LED and the Scan to USB LED go out,
and the machine enters maintenance mode for service personnel.
(4) Connect the computer to the machine with the USB cable.
(5) Turn ON the power switch of the computer.
(6) Press the [Stop] button. The Power LED and the Scan to USB LED light, and the
machine enters function number selection mode.
(7) Extract the "brusbsn.zip" file that was copied into the temporary folder, and double-click
"brusbsn.exe" to start it.
(8) In the [Port] field, select the port number assigned to the Brother Maintenance USB
Printer. If the port number is unknown, follow the steps below to check it.
1) Click [Start], [Settings], and [Printers and Faxes]. The Printers and Faxes window
appears.
2) Right-click the "Brother Maintenance USB Printer" icon.
3) Click [Properties]. The Brother Maintenance USB Printer Properties window appears.
4) Click the [Ports] tab. The Brother Maintenance USB Printer port number is displayed.
(9) Enter the serial number (15 digits) of the machine in the [Serial No] field, and click the
[OK] button.
(10) Check that the CHECK window appeared on the screen, and click the [Yes] button. The
serial number is written to the machine.
4-5
Confidential