Brother ADS-2000 Service Manual page 70

(2) Disconnect all harnesses and flat cables connected to the main PCB ASSY.
Front cover
sensor harness
USB host
Double feeding sensor
PCB harness
harness (Receive)
HARNESS ROUTING: Refer to
(3) Remove the two taptite cup S M3x6 screws to remove the main PCB ASSY from the
machine.
Main PCB ASSY
Main PCB ASSY
Second side
First side CIS
CIS flat cable
flat cable
Fig. 3-12
"1. Main PCB ASSY".
Fig. 3-13
3-18
Power supply PCB
harness
Main motor harness
Panel PCB harness
Taptite cup S M3x6
Confidential