Regulation; Disconnect Device - Brother ADS-2000 Service Manual

Declaration of Conformity (Europe only)
We, Brother Industries, Ltd. of 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561 Japan
declare that this product is in compliance with the essential requirements of Directives
2004/108/EC, 2006/95/EC and 2009/125/EC.
The Declaration of Conformity (DoC) is available on our Website.
Please go to http://solutions.brother.com/.
• choose region (eg. Europe)
• choose country
• choose your model
• choose "Manuals"
• choose Declaration of Conformity (Select Language when required.)
WARNING
Use of controls, adjustments or performance of procedures other than those specified
in this manual may result in hazardous radiation exposure.

Disconnect Device

CAUTION
This product must be installed near an electrical socket that is easily accessible. In
case of emergencies, you must disconnect the power cord from the electrical socket
to shut off power completely.
Wiring Information (U.K. only)
If you need to replace the plug fuse, fit a fuse that is approved by ASTA to BS1362 with the
same rating as the original fuse.
Always replace the fuse cover. Never use a plug that does not have a cover. If in any doubt,
call a qualified electrician.
Warning -This product must be earthed.
The wires in the mains lead are coloured in line with the following code:
• Green and Yellow: Earth
• Blue: Neutral
• Brown: Live

REGULATION

v
Confidential