9.4
Output tray
(1) Turn over the machine to pull out the output tray.
Note:
• When turning over the machine, spread a sheet to prevent top cover to be
scratched.
(2) Remove the four taptite cup B M3x10 screws, and remove the bottom cover from the
machine.
(3) Remove the output tray from the bottom cover.
(4) Remove the four rubber foots from the bottom cover.
Rubber foot
Taptite cup B M3x10
Taptite cup B M3x10
Rubber foot
Rubber foot
Output tray
Bottom cover
Rubber foot
Fig. 3-8
3-15
Confidential