Brother ADS-2000 Service Manual page 87

(4) Remove the power supply harness guide while pushing the hook. Pull out the power supply
PCB harness from the power supply PCB ASSY, and remove the power supply upper
frame from the power supply lower frame.
(5) Release the power harness from the securing fixture, and remove the power supply
harness holder.
(6) Remove the three taptite cup S M3x6 screws to remove the power supply PCB ASSY from
the power supply lower frame.
Taptite cup S M3x6
Power supply lower frame
Power supply
harness holder
Power supply
upper frame
Power harness
Power supply PCB harness
Power supply harness guide
Fig. 3-34
3-35
Power supply harness holder
Power supply PCB ASSY
Hook
Confidential