Service
Manual
Every year (2000 h)
24
Check if the cylinder is dirty and clean it if necessary.
25
Clean external pipes done by customer.
26
Check that the burner works correctly (gas machines only).
27
Clean the inner gas burner with suction device.
28
Check the sight of the ceramic plates joints and change them if necessary.
29
The bearings must be grease once a year, you may grease them using a grease
which same characteristics as that originally used (grease CELTIA G2).
Every three year (6000 h)
30
Clean the ceramic plates with suction device.
31
Change the high temperature joints made of mineral wool.
32
Check the tightness of the venturis.
Note:
The drier-ironing machine textile components must be considered as wearing parts. The lifetime of
these parts (ironing strips, feeding strips, clamping belts, transfer belts, etc.) is highly dependent on
the usage conditions and maintenance frequencies. Consequently, their replacement may not be
claimed under any guarantee.
04102011/GB
39.2009
Preventive maintenance
11
5