51
GAS IGNITION ERROR
A overheating > 230°C is detected.
1. Put the machine in 'Without feeding' mode,
2. Lower the heating temperature using wet
linen.
Once the problem solved, press 'Validation'
button to start again the machine.
MAIN TRANSMISSION ERROR
the no change of states of detector counting is
detected.
Check:
• the DP1 detector counting,
• the motion of the ironing cylinder (M1 motor,
A0 frequency converter, transmission
chain...).
Once the problem solved, press 'Validation'
button to start again the machine.
8
Troubleshooting
05. OVERHEAT DETECTION
Cool machine down in manual mode
or contact your technician
06. MAIN TRANSMISSION ERROR
Read instructions in the manual
or contact your technician
Service
Manual
04102011/GB
06.2009