10
Ironer electricity power supply
The use of power electronics (converter or fi lter for example) may lead to unexpected release of
breakers with 30 mA differential current device.
To avoid these untimely activation, you ought to use differential protecting systems with residual
current only, having a high level of immunity as regards leakage transient current.
This type of breaker should thus be avoided, or a value of 300 mA maximum should be
observed according to standard NFC 15100.
4
Installation
CAUTION
Prior to use, the ironer should be plugged into a correctly earthed
power socket complying with the standards in force.
SAFETY
The electrical installation of the machine must be undertaken by
qualifi ed personnel.
CAUTION
Ensure that the electrical voltage is correct and that the power of your
supply is suffi cient, before connecting the machine.
Service
Manual
04102011/GB
51.2010