37
Operation
The motion of the table is activated when the DP42 cell detects a linen in entry of the stacker.
The motion of the table stops only if the length of linen is correct and is well positioned on the
fl aps (time delay on DP42).
The opening and closing of the table fl aps are carried out according to the length of linen and
the position of this one on the table. The DP43 inductive detector allows ELECTROLUX ITS to
know the fl aps position of the table.
The automatic evacuation of the linen pile is enable using the DP41 cell which detects the
height of stacked linen. A manual removal is also available by pressing the button BP1 of the
stacker controls.
2
Stacker
Service
Manual
04102011/GB
06.2009