Service
Manual
EXHAUSTING FAILURE
A problem has occurred with the throwing out of
the burned gas.
Check:
• the evacuation of the burned gas
• the fan motor.
Once the problem solved, press 'Validation'
button to start again the machine.
HEATING ERROR
The contactors are activated despite the stopping
of the heating.
1. Stop the machine using the main switch.
2. Turn manually the cylinder using the handle
in front of the machine in order to lower
the heating temperature using wet linen.
3. Once the cylinder is cold, remove the left
side frame.
4. Disconnect the wires of the faulty contactor.
5. Change the contactor an replace it by new.
6. Connect the wires on the new contactor.
7. Put the frame.
04102011/GB
06.2009
Troubleshooting
16. EXHAUSTING FAILURE
Read instructions in the manual
Read instructions in the manual
or contact your technician
17. HEATING ERROR
or contact your technician
51
13