Replacement Of The M7 Back-Geared Motor - Electrolux IC4 4819 FFS Service Manual

Service
Manual
Before any intervention it is essential to cut off all supply of the machine
Repair

Replacement of the M7 back-geared motor:

Remove / Assembly:
1. Remove the rear housing of the machine.
2. Remove the belt.
3. Remove the drive pulley.
4. Remove the chain.
5. Remove the disc.
6. Disconnect the wire of the faulty back-geread motor.
7. Remove the support and the back-geared motor.
8. Remove the motor and replace it by a new one.
9. Put the parts back in the reverse sequence.
10. Put back the rear housing.
04102011/GB
06.2009
Cross folding
(electricity, steam, water, gas, compressed air...).
33
11