Description - Electrolux IC4 4819 FFS Service Manual

Service
Manual

Description

The feeding clamps system comprises the following elements:
• 2 electromagnet 'E2' and 'E3' to block the linen on the clamps.
• 2 inductive detectors 'DP71' and 'DP72' to detect the presence of the linen on the
clamps.
• 1 limit switch 'FC74' to detect the moment where the clamps must drop the linen on the
feeding table.
The E2 and E3 electromagnet which block the linen on the clamps are accessible by removing
the splash guard of the clamps.
The DP71 and DP72 detectors which allow to detect the presence of linen on clamps are
accessible by removing the splash guard of the clamps.
The FC74 limit switch is mounted on the main switch support in the left casing. It is accessible
by removing the left side frame.
04102011/GB
21-2012
Feeding: Clamps System
left clamp
31
right clamp
1