Screen: Set Folds Table - Electrolux IC4 4819 FFS Service Manual

22

Screen: SET FOLDS TABLE

BASIC SETTINGS
Feeding auto. start
Feeding auto. return
Folds table choice
Set folds table
Feeding table vacuum
Standby timer (min)
Sleeping timer (min)
Length counter. display
SET FOLDS TABLE
0. Factory folds table
Length = 182
180 ≤ Length < 185
Fold 1
Fold 2&3
Fold 4&5
Fold 6&7
= > Last fold
& offset
Correspondence of keys:
26
ELECTROLUX ITS Screens
From the «BASIC SETTING» screen, press
: 0
: 0
: 0
: 0
: 0
to select «Set folds table»,
: 0
: 0
This screen allows to adjust the folds length of
longitudinal folding.
CAUTION: all modifi cations of
(0): 0
parameters on this screen can only
(0): 0
(0): 0
executed by a qualifi ed and informed
(0): 0
= 0
person.
= 0
Before any change of folds tables, don't forget to
set the main frequency (50 or 60 Hz) of the machine
(see page 30 to 32, Advanced Setting\Machine
Confi guration\Mains frequency).
To escape and move back.
Screen: BASIC SETTINGS (page 22).
To select a parameter.
To
decrease or increase the value
To validate the new parameters.
Screen: BASIC SETTINGS (page 22).
or
then validate.
of the selected parameter.
Service
Manual
04102011/GB
17.2012