Flow Diagram Profibus Dp - Starting The Soft Starter - Siemens SIRIUS 3RW44 System Manual

PROFIBUS DP Communication Module

8.6.5 Flow Diagram PROFIBUS DP - Starting the Soft Starter

8-22
Switch on the supply voltage
for the soft starter
The soft starter sets the outputs to "0"
and accepts the set station
address
The "BUS" LED is red
The soft starter receives the configuration
data from the DP master
Does the configuration
data match the actual structure?
The "BUS" LED lights up green;
Inputs and outputs are enabled;
Data exchange is possible
Ready for operation
Figure 8-14:PROFIBUS DP - starting the soft starter
Yes
Remedy: Match the configuration
No
data to the
structure or vice versa
SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04