Activating The Profibus Dp Communication Module Via The Display, Setting The Station Address; And Saving The Settings - Siemens SIRIUS 3RW44 System Manual

PROFIBUS DP Communication Module
8.4.2 Activating the PROFIBUS DP Communication Module via the Display, Setting the Station
Address and Saving the Settings
8-10
1. When putting the soft starter into operation for the first time, you have to go
through the quick start menu (refer to Chapter 5.2). Also refer to the operating
instructions "3RW44 Soft Starters" (order number: 3ZX1012-0RW44-0AA0).
2. Press the respectively marked key on the device.
SIEMENS
3RW44
Menu
ESC OK
Display mea-
1 1
sured value
select select
ESC OK
Status display
2
select select
ESC OK
Settings
3
select select
ESC OK
Parameter
set 1
select
ESC
Saving
options
select
ESC
Fieldbus
select
ESC
3. The "BUS" LED blinks red.
4. When the PROFIBUS icon
communication module has been activated successfully.
Fieldbus
interface
Off
ESC
Fieldbus
interface
On
1
ESC
select
OK
11
select
OK
10
select
OK
appears on the display, the PROFIBUS DP
1
select change
OK
Fieldbus
1 Off
2 On
select select
ESC OK
Fieldbus.
1
Off
2 On
select select
ESC OK
1
select change
OK
SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04