Siemens SIRIUS 3RW44 System Manual page 132

PROFIBUS DP Communication Module
8-8
Proceed as follows:
Step
3
1
4
Insert a small screwdriver into the
opening in the cover of the 3RW44 soft
starter (1) . Lightly press the screwdriver
downwards (2) and remove the cover
(3) .
3
2
Insert the PROFIBUS DP
communication module into the device
(4) .
Screw in the PROFIBUS DP
communication module with the screws
included in the scope of supply (5) .
Plug the PROFIBUS connecting cable
into the socket of the communication
module (6) . Screw the PROFIBUS
5
connecting cable in tightly.
Switch on the supply voltage.
The "BUS" LED blinks yellow. This
6
means that the communication module
has been inserted correctly, but has not
yet been activated.
5
0,8 ... 1.2 Nm
7 ... 10.3 lb· in
Description
SIRIUS 3RW44 System Manual
GWA 4NEB 535 2195-02 DS 04