Flow Diagram Profibus Dp - Starting The Soft Starter - Siemens SIRIUS 3RW44 User Manual

PROFIBUS DP Communication Module

8.6.5 Flow Diagram PROFIBUS DP - Starting the Soft Starter

Switch on the supply voltage
for the soft starter
The soft starter sets the outputs to "0"
and accepts the set station
address
The "BUS" LED is red
The soft starter receives
the configuration data from the DP
master
Do the configuration
No
data match the actual structure?
Yes
Remedy: Match the configuration
The "BUS" LED lights up green;
data to the
Inputs and outputs are enabled; data
structure or vice versa
exchange is possible
Ready for operation
Figure 8-3: PROFIBUS DP - starting the soft starter
SIRIUS 3RW44 manual
8-22
GWA 4NEB 535 2195-02 DS 06