Siemens SIRIUS 3RW44 System Manual page 3

Safety instructions
This document contains instructions you are strongly advised to observe in order to guarantee your personal safety
and to avoid damage to property. The instructions on your personal safety are marked by a warning triangle, notes on
risk of property damage have no warning triangle. Depending on the degree of risk, the instructions are presented as
follows.
Danger
means that death or serious physical injuries will follow if you do not take the appropriate precautionary measures.
Warning
means that death or serious physical injuries may follow if you do not take the appropriate precautionary measures.
Caution
with a warning triangle means that minor physical injuries may follow if you do not take the appropriate
precautionary measures.
Caution
without a warning triangle means that damage to property may follow if you do not take the appropriate
precautionary measures.
Notice
means that an undesired result or condition may occur if the corresponding instruction is not observed.
Where several degrees of risk are present at the same time, the instruction for the highest degree of risk is used. If an
instruction with a warning triangle contains a warning against personal injury, the same instruction may also contain an
additional warning against damage to property.
Qualified personnel
The associated device/system must only be configured and used in conjunction with this documentation. Devices/
systems must be commissioned and operated by qualified personnel only. Qualified personnel according to the
safety instructions of this documentation are persons authorized to commission, ground, and mark devices, systems
and current circuits according to the relevant safety standards.
Notes on proper use
Please observe the following:
Warning
The device may only be used for applications specified in the catalog and the technical descriptions. Furthermore it
may only be used in combination with third-party devices and components recommended or approved by Siemens.
Faultless and safe operation is only ensured if the product is transported, stored, mounted and installed properly
and if operation and maintenance is carried out conscientiously.
Trademarks
All names carrying the industrial property mark ® are registered trademarks of Siemens AG. The other designations in
this publication may be trademarks whose use by third parties for their own purposes may infringe the rights of the
owners.
Copyright Siemens AG 2005. All rights reserved.
This document shall not be transmitted or reproduced, nor shall its
contents be exploited or disclosed to third persons without prior written
consent from Siemens. Infringements will be subject to damage claims.
All rights reserved, in particular in case of a patent grant of utility model
registration.
Siemens AG
Automation & Drives
P.O. box 4848, 90327 Nuremberg, Germany
Siemens Aktiengesellschaft
Disclaimer of liability
Although we have carefully checked the contents of this publication for
conformity with the hardware and software described, we cannot
guarantee complete conformity since errors cannot be excluded. The
information provided in this manual is checked at regular intervals and
any corrections which might become necessary will be included in the
next editions.
©
Siemens AG 2005
Subject to technical changes