Show Radius Authentication - Cisco NCS 5000 Series Manual

Authentication, Authorization, and Accounting Commands

show radius authentication

To obtain information and detailed statistics for the RADIUS authentication server and port, use the show
radius authentication command in the XR EXEC mode.
show radius authentication
Syntax Description
This command has no keywords or arguments.
Command Default
If no RADIUS servers are configured on the router, the output is empty. If the default values are for the counter
(for example, request and pending), the values are all zero because the RADIUS server was just defined and
not used yet.
Command Modes
XR EXEC mode
Command History
Release
Release 6.0
Usage Guidelines
No specific guidelines impact the use of this command.
Task ID
Task ID
aaa
Examples
The following sample output is for the show radius authentication command:
RP/0/RP0/CPU0:router# show radius authentication
Server: 12.26.25.61, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.26.49.12, port: 1812
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Server: 12.38.28.18, port: 21099
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
Operations
read
System Security Command Reference for Cisco NCS 5000 Series Routers
show radius authentication
Modification
This command was introduced.
73