Toyota 4A-FE Repair Manual page 40

EM-46
SST
ENGINE MECHANICAL - Timing Belt ( 4A-FE)
(b)
EM4284
6. INSTALL TIMING BELT GUIDE
lnstall the guide, facing the cup side outward.
EM7004
7. INSTALL TIMING BEL T COVERS
(a)
(b)
EM6239
8. INSTALL CRAN KSHAFT PU LLEY
(a)
{b)
SST 09213-14010 and 09330-00021
Torque:
INSTALL CYLINDER HEAD COVER
9.
(See steps 14 and 18 on pages EM-86 and 88)
10. INSTALL SPARK PLUGS (See page IG-8)
Torque:
11. INSTALL WATER PUMP PULLEV AND DRIVE BELT
12. CHECK AND ADJUST DRIVE BEL T
(See step 3 on pages CH-3 and 4)
lf the measured value is not within standard, readjust
with the idler pulley.
lnstall the No.1 timing belt cover with the three bolts.
lnstall the No.2, No.3 timing belt covers and engine
wire bracket with the six bolts.
Align the pulley set key with the key groove of the
pulley, slide on the pulley.
Temporarily install the pulley bolt.
1,200 kg-cm {87 ft-lb, 118 N·m)
180 kg-cm {13 ft-lb, 18 N·m)