Toyota 4A-FE Repair Manual page 71

ENGINE MECHANICAL - Cylinder Head (4A-FE)
EM-87
_, (',1 ' .,
--<z
1
1-- ... -
4
) )
EM7602
EM7593
(c) Install the gasket to the head cover.
(d) Install the head cover with the three grommets and
cap nuts.
Torque: 80 kg-cm (69 in.-lb, 7.8 N·m)
15. INSTALL INTAKE MANIFOLD
(2WD)
(a) Install a new gasket and the intake manifold with the
seven bolts. ground strap and two nuts.
Torque: 195 kg-cm (14 ft-lb. 19 N·m)
(b) Connect the water by-pass hose to the air pipe.
(c) Install the manifold stay with the two bolts.
Torque:
12 mm bJ:>lt head 195 kg-cm (14 ft-lb, 19 N·m)
14 mm bolt head 400 kg-cm (29 ft-lb, 39 N·m)
(4WD)