Toyota 4A-FE Repair Manual page 62

EM-78
Intake
Painted Brown
ENGINE MECHANICAL -
Cylinder Head (4A-FE)
EM7708
Exhaust
EM2312
ASSEMBL V OF CYLINDER HEAD
(See pages EM-56, 57)
HINT:
• Thoroughly clean all parts to be assembled.
• Before installing the parts, apply new engine oil to all
sliding and rotating surfaces .
• Replace all gaskets and oil seals with new ones.
1. INSTALL SPARK PLUG TUBES
HINT: When using a new cylinder lead, spark plug tubes
must be installed.
(a) Apply adhesive to the spark plug tube hole of the
cylinder head.
Adhesive: Part No. 08833-00070, THREE BOND
1324 or equivalent
(b) Using a press, press in a new spark plug tube until
46.8 - 47.6 mm (1.843 - 1.874 in.) is protruding
from the cylinder head .
NOTICE: Avoid tapping a new spark plug tube in too
far by measuring the amount of pro1rusion while press-
ing.
2.
INST ALL VALVES
(a)
Using
SST.
push in a new oil seal.
SST 09201-41020
HINT : The intake valve oil seal is brown and the exhaust
valve oil seal is black.