Toyota 4A-FE Repair Manual page 126

Fl-106
EFI SYSTEM - Fuel System
4. REMOVE COLD START INJECTOR
Remove the two bolts, cold start injector and gasket.
INSPECTION OF COLD START INJECTOR
1. INSPECT INJECTION OF COLD START INJECTOR
CAUTION: Keep clear of sparks during the test.
(a) Install SST (two unions) to the injector and delivery
pipe with new gaskets and the union bolts.
SST 09268-41045 (09268-41080)
(b)
Connect SST (hose) to the union.
SST 09268-41045
{c) Connect SST (wire) to the injector.
SST 09842-30055
(d) Put a container under the injector.
(e)
Reconnect the battery negative ( - ) cable.
(f)
Turn the ignition switch ON.
NOTICE: Do not start the engine.