IGNIT~ON
SYSTEM -
Integrated Ignition Assembly (llA) (4A-FE)
IG-17
!Gl 189
ASS EMBLY OF llA
{See page IG-15)
1.
INSTALL llA WIRE
(a)
Fit the wire grommet to the llA housing.
(b)
Install the llA wire with the screw.
(c)
Install the connector to the cord clamp.
2.
INSTALL IGNITER
(a)
Install the igniter with the two screws.
(b)
Connect the three wires to the igniter terminals with
the three screws.
3.
INSTALL IGNITION COIL
(a)
Install the gasket and ignition coil with the four
screws.
(b)
Connect the three wires to the ignition coil terminals
with the two nuts.