ENGINE MECHANICAL -
Engine Tune-up (4A-FE)
EM-15
Front
Back
'------------~'"\~~061
ENGINE TUl\IE-UP (4A-FE)
INSPECTION OF ENGINE COOLANT
(See steps 1 and 2 on page C0-5)
INSPECTION OF ENGINE OIL
(See steps 1 and 2 on page LU-6)
INSPECTION OF BATTERY
(See page 1 and 2 on page CH-3)
Standard specific gravity:
1.25 - 1.27 when fully charged at 20°C (68°F}
INSPECTION OF AIR FIL TEA
1.
INSPECT AIR FILTER
Visually check that the element is not excessively dirty,
damaged or oily.
2.
CLEAN AIR FILTER
Clean the element with compressed air.
First blow from the back thoroughly. Then blow off the
front of the element.
INSPECTION OF HIGH-TENSION CORDS
(See page IG-5)
Maximum resistance:
25 fl
per cord
INSPECTION OF SPARK PLUGS
(See page IG-6)
Correct electrode gap:
0.8 mm (0.031 in.)
Recommended spark plugs:
ND
Q16R-U
NGK
BCPR5EY
INSPECTION OF ALTERNATOR DRIVE BELT
(See page 3 on page CH-3}
Drive belt deflection:
Used belt
10.0 - 12.0 mm (0.394 - 0.4 72 in.)
New belt
8.5 - 10.5 mm (0.335 - 0.413 in.)
Drive belt tension (Reference):
Used belt
40 - 55 kg
New belt
60 - 70 kg