Toyota 4A-FE Repair Manual page 122

Fl-96
!
Check Connector
EFI SYSTEM - Fuel System
Fl42J 7
Fl4686
SST
EM7604
(d) Put a suitable container or shop towel under cold
start injector pipe.
(e) Slowly loosen the union bolts of the cold start injec-
tor pipe and remove the bolts, cold start injector pipe
and four gaskets.
(f)
Drain the fuel from the delivery pipe.
(g) Install SST (pressure gauge) to the delivery pipe with
new two gasket and union bolt.
SST 09268-45012
Torque: 4A-FE 180 kg-cm (13 ft-lb, 18 N·m)
(h)
Wipe off any splattered gasoline .
(i)
Reconnect the battery negative ( - ) cable.
(j)
Using SST, connect terminals +B and FP of the
check connector.
SST 09843-18020
LOCATION: See page Fl-133