Engine And Hydraulics Cooling System; Specific Safety Instructions - Wacker Neuson 1001 Operator's Manual

Dumper
Table of Contents

Advertisement

Maintenance
5.5

Engine and hydraulics cooling system

Specific safety instructions

5-12
The oil/water radiator is located in the engine compartment, behind the engine. It cools the
diesel engine, and the hydraulic oil of the drive and operating hydraulics.
The coolant reservoir is located in the engine compartment next to the toolbox.
• Dirt on the radiator fins reduces the radiator's heat dissipation capacity! To avoid this:
Clean the outside of the radiator at regular intervals. Use oil-free compressed air (2
bar max.) to clean. Maintain a certain distance from the radiator to avoid damage to
the radiator fins. Refer to the maintenance plans in the appendix for the cleaning
intervals
In dusty or dirty work conditions, clean more frequently than indicated in the mainte-
nance plans
• An insufficient coolant level reduces the heat dissipation capacity as well and can
cause engine damage! Therefore:
Check the coolant level at regular intervals. Refer to the maintenance plans in the
appendix for the intervals
If coolant must be added frequently, check the cooling system for leaks and/or con-
tact your dealer!
Never add cold water/coolant if the engine is warm!
After filling the coolant reservoir, make a test run with the engine and check the cool-
ant level again after stopping the engine
• The use of the wrong coolant can destroy the engine and the radiator. Therefore:
Add enough antifreeze compound to the coolant – but never more than 50 %. If pos-
sible use brand-name antifreeze compounds with anticorrosion additives
Observe the coolant compound table
Do not use cooler cleaning compounds if an antifreeze compound has been added to
the coolant – otherwise this causes sludge to form, which can damage the engine
• Once you have filled the coolant reservoir:
Test run the engine
Stop the engine
Let the engine cool down
Check the coolant level again
Environment
Use a suitable container to collect fluids and lubricants as they flow out and
dispose of them in an environmentally friendly manner.
BA 1001/1501/2001 us – Edition 3.3 * * 12001b510.fm

Advertisement

Table of Contents
loading

This manual is also suitable for:

15012001

Table of Contents