Table of Contents
Advertisement
Maintenance
5.4
Engine lubrication system
Checking the oil level
A
Fig. 81: Checking the oil level
5-10
NOTICE
Engine damage and loss of output in case of insufficient engine oil level, or
wrong engine oil!
Have the oil changed by a Wacker Neuson service center
– see chapter 5.16
Important
In order to avoid engine damage, add the engine oil slowly so it can go down
without entering the intake system.
Important
Check the oil level once a day.
We recommend checking it before starting the engine. After stopping a warm
engine, wait at least 5 minutes before checking.
Checking the oil level
Proceed as follows:
• Park the machine on level ground
• Stop the engine!
• Let the engine cool down
• Open the engine cover
• Clean the area around the oil dipstick with a lint-free cloth
• Oil dipstick A:
Pull it out
Wipe it with a lint-free cloth
Push it back in as far as possible
Withdraw it and read off the oil level
However if necessary, add oil at the latest when the oil reaches the MIN mark on the oil
dipstick A
Maintenance plan 2001 (overview) on page 5-39
BA 1001/1501/2001 us – Edition 3.3 * * 12001b510.fm
Advertisement
Table of Contents
