Operation
Mirrors (option)
Adjusting the outside rearview mirrors on left and right
Fig. 26: Mirrors (symbolic representation)
BA 1001/1501/2001 us – Edition 3.3 * 12001b330.fm
WARNUNG
WARNING
W
Accident hazard if mirrors are adjusted incorrectly!
Can cause severe injury or death.
•
Use safety-oriented ladders and work platforms for adjustment work on the
machine.
•
Never use machine parts or attachments/superstructures as a climbing aid.
•
Do not adjust the mirrors during machine travel.
•
Immediately replace damaged or broken mirrors.
•
Additional equipment or attachments must not impair visibility.
•
Convex mirrors enlarge, reduce or distort the field of view. Bear this in mind
when adjusting and using such mirrors.
WARNUNG
WARNING
W
Injury hazard to persons in the danger zone!
Can cause severe injury or death.
•
Follow the safety instructions.
•
Check the surroundings constantly.
•
Put the machine into operation/machine travel only if visibility is sufficient
(have another person guide you if necessary).
Important
We recommend having the mirrors adjusted by a second person.
Adjust the mirrors in order to:
• Ensure sufficient visibility from the operator seat onto the job site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear edges of the machine in the mirrors.
Operation
3-15