Table of Contents
Advertisement
Operation
Tying down the machine
Fig. 69: Tying down the machine
3.30 Battery master switch 1001 – 1501
A
B
C
Fig. 70: Battery master switch
3-42
• Stop and park the machine
Important
The manufacturer's warranty shall not apply to accidents or damage caused
by loading or transporting.
WARNUNG
WARNING
W
Accident hazard due to incorrect loading!
Can cause severe injury or death.
•
Follow the safety instructions at the beginning of this chapter and any other
safety instructions relevant in your country.
Important
Only use OSHA-approved lifting devices. Use edge protectors to avoid dam-
age both to the machine and the OSHAapproved lifting devices.
• Secure the wheels of the dumper at the front, rear and at the sides.
• Two eyelets on the front chassis of the dumper and a pin on the rear chassis are
used for this
• Ensure that the operator of the transport vehicle knows the overall height, width and
weight of his vehicle (including the dumper) before starting machine travel, and the legal
transport regulations of the country or countries in which transport will take place!
Important
Do not disconnect the battery while the engine is running!
Important
Power supply is interrupted directly after the battery, by means of a key
• Before working on the electrical system.
Interrupting power supply:
Turn key A of the battery master switch to position B and remove it
Switching on power supply:
Insert key A in the battery master switch
Turn the key down to the notched position C
The 2001 dumper has a Quickpower Plus terminal instead of a main switch
BA 1001/1501/2001 us – Edition 3.3 * * 12001b330.fm
Advertisement
Table of Contents
