Wheel change
BA 1001/1501/2001 us – Edition 3.3 * 12001b530.fm
NOTICE
The wheels are heavy and can damage the threads on the wheel studs if they
are handled incorrectly!
Use suitable assembly tools, such as covering sleeves for the studs, a jack, etc.
NOTICE
Fitting narrow tires is prohibited.
Removing
Proceed as follows:
Park the machine on level and firm ground and prevent it from rolling away
Slightly loosen the wheel nuts of the wheel you want to remove
Place a jack under the axle body, making sure it is standing firmly
Raise the side of the axle from which you want to remove the wheel
Check the machine is standing firmly
Completely remove the wheel nuts
Remove the wheel
Installing
Proceed as follows:
Place the wheel onto the wheel bolts
Tighten all wheel nuts part-way
Lower the raised axle
Tighten the wheel nuts to 200 Nm (148 ft.lbs)
Important
Subsequent to changing wheels check the wheel nuts for tightness after
10 operating hours – tighten if necessary!
Maintenance
5-27