Replacing The Filter - Wacker Neuson 1001 Operator's Manual

Dumper
Table of Contents

Advertisement

Maintenance

Replacing the filter

D
Fig. 85: Removing the lower housing section
Fig. 86: Removing the filter element
5-16
• Replace filter A as follows:
Stop the engine
Remove the key and carry it with you
Let the engine cool down
Open the engine cover
E
Remove dirt and dust from the air filter and the area around the air filter
Fold both bow clips D on lower housing section E to the outside
Remove lower housing section E
Unscrew wing nut F
Carefully remove filter B with slightly turning movements
Ensure that all dirt (dust) inside the air filter housing has been removed
B
Clean the parts with a clean lint-free cloth, do not use compressed air
Check the air filter cartridges for damage. Use only intact and clean filters
Carefully insert the new filter B in the air filter housing
Position lower housing section E (ensure that it is properly seated)
Close both bow clips D
F
BA 1001/1501/2001 us – Edition 3.3 * * 12001b520.fm

Advertisement

Table of Contents
loading

This manual is also suitable for:

15012001

Table of Contents