Table of Contents
Advertisement
Operation
3.27 Center-pivot prop
A
Fig. 61: Center-pivot prop
3.28 Locking the control levers
Locking the control levers (1001/1501)
A
Fig. 62: Locking the control levers (1001/1501)
3-38
WARNING
W
Crushing hazard if the skip is not supported correctly!
Can cause severe injury or death.
•
Support the skip before performing maintenance.
The center-pivot prop connects the front and rear chassis to prevent steering movements
B
(via the articulated joint) when crane handling the dumper.
Proceed as follows:
Remove the spring plug from pin B
Turn center-pivot prop A toward the rear chassis
Secure center-pivot prop A with the spring plug and pin B
Important
Before putting the machine into operation again, install the center-pivot prop
back onto the front chassis again by means of pin B.
Important
Lock the control levers for the skip during road travel.
Fold back control lever lock A.
B
WARNUNG
This avoids unintentional actuation of the skip.
BA 1001/1501/2001 us – Edition 3.3 * * 12001b330.fm
Advertisement
Table of Contents
