Brake Pedal (Standard For 1001 + 1501, Option For 2001) - Wacker Neuson 1001 Operator's Manual

Fig. 32: Starting machine travel
2
1
Fig. 33: Accelerator pedal (symbolic representation)

Brake pedal (standard for 1001 + 1501, option for 2001)

2
Fig. 34: Brake pedal 1001/1501
2
Fig. 35: Brake pedal 2001
BA 1001/1501/2001 us – Edition 3.3 * 12001b330.fm
Selection of travel direction
Stop the machine.
B
Press brake pedal 2 or apply the parking brake
page 3-22.
Set travel direction lever B to the required position.
Release the brake and press accelerator pedal 1 to start machine travel.
1
Accelerator pedal 1 sets the engine speed and travel speed.
Function
Press the pedal
Reduce the pressure on the pedal
Release the pedal
The speed with which the skip moves also depends on the position of the accelerator pedal.
The machine brakes automatically to a standstill when releasing the accelerator pedal.
Press and release the accelerator pedal slowly to avoid jerky movements of the dumper.
Press brake pedal 2 for faster deceleration, or during downhill machine travel, for example.
Press brake pedal 2 to brake the machine.
1001:
• Option up to serial no. EA03288
• Standard from serial no. EA03289
1501:
• Option up to serial no. WNCD0105TPAL00165
• Standard from serial no. WNCD0105TPAL00166
– see chapter Parking brake on
The machine accelerates
The machine is braked
Idling speed
Operation
3-21