Table of Contents
Advertisement
2.4
General Conduct and Safety Instructions
Conditions for use
User training and knowledge
Preparing for use
Modifications and spare parts
BA 1001/1501/2001 us – Edition 3.3 * 12001b210_us.fm
• The machine has been designed and built in accordance with state-of-the-art standards
and recognized safety regulations. Nevertheless, its use can constitute a risk to life and
limb of the user or of third parties, or cause damage to the machine and to other
material property.
• Read and follow this Operator's Manual and other manuals that accompany the
machine.
• The machine must only be used in accordance with its designated use and the
instructions set forth in this Operator's Manual.
• The machine must only be used by safety-conscious persons who are fully aware of the
risks involved in operating the machine.
• The machine must only be used when it is in serviceable condition. Any mechanical
dysfunctions, especially those affecting the safety of the machine, must be repaired
immediately.
• The user/owner commits himself to operate and keep the machine in perfect condition
and, if necessary or required by law, to require the operating or servicing persons to
wear protective clothing and safety equipment.
• Always keep this Operator's Manual and other manuals that accompany the machine
on hand in their storage bin at the place of use of the machine. Immediately replace an
incomplete or illegible Operator's Manual.
• All persons working on or with the machine must read and understand the safety
information in this Manual before beginning machine operation. This applies especially
to persons working only occasionally on the machine, such as performing set-up or
maintenance tasks.
• Follow and instruct the operator in legal and other mandatory regulations relevant to
accident prevention and environmental protection. These may include handling
hazardous substances, issuing and/or wearing personal protective equipment, or
obeying traffic regulations.
• The user/owner must regularly ensure that all persons entrusted with operation or
maintenance of the machine are working in compliance with this Operator's Manual and
are aware of the risks and safety factors of the machine.
• Before starting up the machine, always inspect the machine to make sure that it is
ready for safe machine operation and traveling.
• Wear close-fitting work clothes that do not hinder movement. Tie back long hair and
remove all jewelry (including rings).
• Never make any modifications, additions or conversions to the machine and its
superstructures (for example, cab, etc.), or the machine's attachments, without the
approval of Wacker Neuson! Such modifications may affect safety and/or machine
performance. This also applies to the installation and adjustment of safety devices and
valves, as well as to welding work on load-bearing elements.
• Spare parts must comply with the technical requirements specified by Wacker Neuson.
Contact your Wacker Neuson dealer for assistance.
Safety Information
2-3
Advertisement
Table of Contents
