3.26 Releasing the hydraulic parking brake 2001
3
2
1
3
BA 1001/1501/2001 us – Edition 3.3 * 12001b330.fm
Remove both extraction units (2) installed at the front on the mudguard to release the
hydraulic parking brake (1). Remove hexagon head screw (3) M12x35 (ws 19) to this effect.
Remove the plastic plugs (4) in the middle on the face of the wheel motors.
Place the extraction unit on the face of the wheel motor and fasten it with screw M12x35.
Tighten the screw to 42 Nm (31 ft.lbs) until the wheel turns freely.
2
Operation
3-37