Table of Contents
Advertisement
Operation
Check lists
Start-up checklist
3-10
The checklists below are intended to assist you in checking and monitoring the machine
before, during and after operation.
These checklists cannot claim to be exhaustive; they are merely intended as an aid for you
in fulfilling your duties as a conscientious operator.
The checking and monitoring work listed below is described in greater detail in the follow-
ing chapters.
If the answer to one of the following questions is NO, first rectify the cause of the fault
before starting or continuing work.
Check the following points before putting the machine into operation or starting the engine:
No. Question
1
Enough fuel in the tank? (
2 Coolant level OK? (
3
Remove water in the diesel fuel prefilter (
4
Engine oil level OK? (
5 Oil level in hydraulic oil reservoir OK? (
7 V-belt condition and tension checked? (
8
Lubrication points greased?
9
Check hydraulic hoses, connections and cylinder seals for leaks
10 Firm position of battery terminals
11 Tires checked for cracks, cuts, etc. ? (
12 Footholds clean?
13 Engine cover locked with the buckle? (
Especially after cleaning, maintenance or repair work:
14
Rags, tools and other loose objects removed?
15 Seating position adjusted correctly? (
16 Rollbar raised and locked?
17 Seat belt fastened? (
5-5)
5-13)
5-7)
5-10)
5-21)
5-18)
5-26)
3-29)
3-27)
3-28)
BA 1001/1501/2001 us – Edition 3.3 * * 12001b320.fm
Advertisement
Table of Contents
